Contractors License Board, Professional and Vocational Licensing Division, Hawaii Department of Commerce and Consumer Affairs (DCCA) administers B General Building Contractor licensing in Hawaii. Every figure below is verified against the board’s own official pages and dated. Who must personally hold a credential — the contractor, the business, or the individual worker — is set out under Requirements.
What it’s called
Hawaii general contractor license; Hawaii general building contractor license; Hawaii B license; Hawaii contractor license class B; Hawaii general engineering (A) license. The Contractors License Board licenses three branches under HRS 444-7: A general engineering, B general building and C specialty contractors. Specialty classifications such as C-13 electrical and C-37 plumbing are separate C classifications and are not covered on this page.
License types & fees
| Type | Experience | Exam | Fee | Scope Limit |
|---|---|---|---|---|
| Contractor license, "B" General Building Contractor classification (sole proprietor, or contracting entity qualified through a Responsible Managing Employee) | HAR 16-77-18(a): not less than four years of supervisory experience "as a foreman, supervising employee, or contractor in the particular classification" within the past ten years immediately preceding the application; contracting entities qualify through an RME who meets this requirement (16-77-18(c)). The application packet requires not less than 3 notarized experience certificates and a Chronological History of Projects form; technical training may count for no more than one year of experience. | Part I Business and Law and Part II Trade (HAR 16-77-39, 16-77-40); 75% minimum passing grade for each part (HAR 16-77-44). PSI candidate bulletin (1/20/2026): B General Building 80 questions, 75%, 240 minutes; Business and Law 80 questions, 75%, 180 minutes; both closed book. | Application fee $50 per application (application packet and Board FAQ). PSI examination fee for B-General Building Contractor $85; Business and Law (all others) $80 (PSI bulletin 1/20/2026). License fees are assessed after Board approval and passage of the exam; see the fees section. | HRS 444-7(c): a general building contractor is a contractor whose principal contracting business is in connection with any structure "requiring in its construction the use of more than two unrelated building trades or crafts, or to do or superintend the whole or any part thereof." HAR 16-77-33(b): "A general building contractor license does not entitle the holder to undertake a contract unless it requires more than two unrelated building trades or crafts or unless the general building contractor holds the specialty license to undertake the contract." HAR 16-77-32(c): the B classification automatically includes C-5, C-6, C-10, C-12, C-24, C-25, C-31a, C-32a, C-42a and C-42b without further examination or fees. Electrical and plumbing work also requires an individual electrician or plumber license under HRS Chapter 448E (application packet CT-00(B) 1025). |
| Contractor license, "A" General Engineering Contractor classification | Same HAR 16-77-18 rule: four years of supervisory experience in the classification within the past ten years. | Business and Law plus the A General Engineering trade exam at PSI; 75% passing grade for each part (HAR 16-77-44). | Application fee $50; PSI examination fee for A-General Engineering $85 and Business and Law $80 (PSI bulletin 1/20/2026). | HRS 444-7(b): a general engineering contractor is one "whose principal contracting business is in connection with fixed works requiring specialized engineering knowledge and skill" (irrigation, drainage, water supply, harbors, highways, bridges, sewers, pipelines, earth-moving and similar fixed works). HAR 16-77-32(a) lists the specialty classifications automatically included with A. |
Who does NOT need this license — exemptions
HRS 444-2 (current legislature text, as of October 29, 2026) exempts, among others: government officers and employees in their duties; court-appointed receivers and similar; sellers or installers of finished products that do not become a permanent fixed part of the structure; “Any project or operation for which the aggregate contract price for labor and materials is not more than $1,500”, except where a building permit is required regardless of price or where the work is part of a larger project or split to evade the chapter; registered architects and engineers in their professional capacity; employees whose sole compensation is wages; owner-builders under 444-2.5; joint ventures whose members are all licensed. Two official texts differ on the minor-work amount: the HRS Chapter 444 PDF posted by DCCA and the Board FAQ (7/9/18) state not more than $1,000 including labor, materials, taxes and all other items. Owner-builder (HRS 444-2.5, current legislature text): owners or lessees who build or improve residential or farm buildings for their own use or for use by grandparents, parents, siblings or children, and who do not offer them for sale or lease, provided the owner registers under 444-9.1, does not do electrical or plumbing work requiring a license (unless licensed under chapter 448E), supervises the work, hires licensed subcontractors, and covers workers’ compensation and payroll taxes for unlicensed workers. Sale or lease within one year of completion is prima facie evidence the work was for sale or lease, with exceptions in 444-2.5(b). The DCCA-posted HRS PDF version of 444-2.5 lists residential, farm, industrial, or commercial buildings. The full exemption lists are in HRS 444-2 and 444-2.5.
Fees
Application: “Attach the $50 non-refundable application fee for each application filed” (application packet CT-00(B) 1025, as of October 29, 2026). The application form’s fee block lists: Appl $50; Lic $260; RF $150; EF $10; CRF $74/$148; 1/2 Ren $95 (sole proprietor and entity forms; the RME form lists 1/2 Ren $30 and no RF or EF). HRS 444-26(c): a $150 contractors recovery fund fee is paid in addition to the original license fee; HAR 16-77-12: a contractors education fund fee of ten dollars accompanies the application. The packet: “License fees will be due. Specific amounts will be given at the appropriate time.” Board FAQ (dated 7/9/18, still linked from the Board page): license fee for a contracting entity or sole proprietor $663 if licensed between October 1 of the even-numbered year and September 30 of the odd-numbered year, and $494 if licensed between October 1 of the odd-numbered year and September 30 of the even-numbered year; RME $438 or $334. PSI exam fees (bulletin 1/20/2026): A-General Engineering $85, B-General Building Contractor $85, all others (including Business and Law) $80; the Board FAQ (7/9/18) states $75 per part. Renewal (Board page, licensing period October 1, 2026 to September 30, 2028): entity or sole proprietor active $338; RME active $208; any inactive $160. The Board FAQ (7/9/18) lists a $353 renewal fee for entities and sole proprietors. Restoration within 60 days after expiration (Board page): entity or sole proprietor $388; RME $258; inactive $210.
Exam
Exam vendor: the Board’s examination page (as of October 29, 2026): “Effective January 2023, the contractor examinations will be administered by PSI Services, LLC.” The application packet CT-00(B) 1025 still names Prometric as the testing service; both statements are on official Board documents. Applicants register with PSI only after Board approval. PSI candidate bulletin (dated 1/20/2026): Business and Law, 80 questions, 75% passing score, 180 minutes; B General Building Contractor, 80 questions, 75%, 240 minutes; both closed book. All new applicants take Business and Law; a licensee adding a classification takes only the trade exam (PSI bulletin). HAR 16-77-44: “A grade of seventy-five per cent shall be a minimum passing grade for each part of any examination.” Retakes: PSI states unsuccessful candidates “may be able to retest within two business days” depending on space; the exam must be passed within six months of eligibility (Board examination page; HAR 16-77-45).
Renewal & continuing education
Biennial. Board page (as of October 29, 2026): “Renew by September 30 of every even-numbered year”; the current licensing period runs October 1, 2026 to September 30, 2028, and “All licenses regardless of issuance date, are subject to renewal by September 30, every even-numbered year.” HRS 444-15(a): failure to pay the renewal fees and submit required documents by September 30 of each even-numbered year is a forfeiture; 444-15(b) allows restoration with a penalty fee within sixty days from September 30. HAR 16-77-51 states restoration is accepted on or before November 30 of the renewal year. Renewal conditions (HAR 16-77-55): a current state tax clearance or payment arrangement, continuous workers’ compensation and liability insurance at the required limits, and any Board-imposed bond. Entities and sole proprietors need a tax clearance within 6 months of renewing (Board page). HRS Chapter 444 and HAR Chapter 16-77 (Contractors), as read on October 29, 2026, contain no continuing-education requirement for renewal of an A or B contractor license; HAR 16-77-55 lists the renewal conditions (tax clearance, insurance, bond). The refresher-training provision in HAR 16-77-116 applies to asbestos contractors only.
How to apply
Applications are handled by Contractors License Board, Professional and Vocational Licensing Division, Hawaii Department of Commerce and Consumer Affairs (DCCA). Start at the official application page .
Verify a license in Hawaii
Hawaii Department of Commerce and Consumer Affairs, Professional and Vocational Licensing Division publishes a public license search . It covers DCCA PVL public license search, linked as Check a License from the Contractors License Board page - a search across PVL license types, not contractor-only.
Results come from the operator’s own system, through the search above. LicensingAtlas does not hold license records and cannot confirm any individual’s status — the date on this page refers to the requirements described above, not to anyone’s credential.