North Carolina Licensing Board for General Contractors (NCLBGC) administers general contractor licensing in North Carolina. Every figure below is verified against the board’s own official pages and dated. Who must personally hold a credential — the contractor, the business, or the individual worker — is set out under Requirements.

What it’s called

North Carolina general contractor license; NC GC license; NC building contractor license; NC residential contractor license; NC home builder license. North Carolina issues one general contractor license that combines a limitation (Limited, Intermediate or Unlimited, set by project value) with one or more classifications (Building, Residential, Highway, Public Utilities, Specialty, Unclassified). Residential is a classification of the general contractor license, not a separate residential builder license. Electrical, plumbing and HVAC work is licensed by separate North Carolina boards. G.S. 87-15.4 also creates the North Carolina Certified Accredited Residential Builder and Accredited Master Residential Builder designations for licensees who complete North Carolina Builders Institute education.

License types & fees

TypeExperienceExamFeeScope Limit
Limited license (Building or Residential classification)G.S. 87-10(a) and the NCLBGC License applicants page state no minimum years of experience; the prerequisites are age 18, good moral character, financial responsibility, the application fee and consent to a criminal background check if required. Financial responsibility for a limited license, 21 NCAC 12A .0204(b)(2): "have current assets that exceed the total current liabilities by at least seventeen thousand dollars ($17,000) or have a total net worth of at least eighty thousand dollars ($80,000)"; or, under .0204(e), a surety bond of "one hundred seventy-five thousand dollars ($175,000) for a limited license".The qualifier passes the PSI exam for the classification. PSI bulletin (updated 11/19/2025): Building exam 90 questions, 70% required to pass, 200 minutes; Residential exam 90 questions, 70% required to pass, 210 minutes.21 NCAC 12A .0304(a)(1): "Application for limited license: $75.00". Annual renewal fee not to exceed $75.00 (G.S. 87-10(e)). PSI examination fee $79 per exam.G.S. 87-10(a1): "the holder of a limited license shall be entitled to act as general contractor for any single project with a value of up to seven hundred fifty thousand dollars ($750,000), excluding the cost of land and any ancillary costs to improve the land." The NCLBGC FAQ (as of October 29, 2026): "A limited license allows contractors to undertake individual projects up to $750,000 each." The classification on the license is set by the qualifier's exam: Building (G.S. 87-10(b)(1): "private, public, commercial, industrial and residential buildings of all types") or Residential (G.S. 87-10(b)(1a): "any general contractor constructing only residences which are required to conform to the North Carolina Residential Code").
Intermediate license (Building or Residential classification)No minimum years of experience in G.S. 87-10(a). Financial responsibility, 21 NCAC 12A .0204(c)(2): "have current assets that exceed the total current liabilities by at least seventy-five thousand dollars ($75,000), as reflected in an agreed-upon procedures report on a form provided by the Board or an audited financial statement"; or a surety bond of "five hundred thousand dollars ($500,000) for an intermediate license" (.0204(e)).Same classification exams as the limited license (Building or Residential, through PSI).21 NCAC 12A .0304(a)(2): "Application for intermediate license: $100.00". Annual renewal fee not to exceed $100.00 (G.S. 87-10(e)). PSI examination fee $79 per exam.G.S. 87-10(a1): "the holder of an intermediate license shall be entitled to act as general contractor for any single project with a value of up to one million five hundred thousand dollars ($1,500,000), excluding the cost of land and any ancillary costs to improve the land."
Unlimited license (Building or Residential classification)No minimum years of experience in G.S. 87-10(a). Financial responsibility, 21 NCAC 12A .0204(d)(2): current assets exceeding total current liabilities "by at least one hundred fifty thousand dollars ($150,000), as reflected in an agreed-upon procedures report on a form provided by the Board or an audited financial statement"; or a surety bond of "one million dollars ($1,000,000) for an unlimited license" (.0204(e)).Same classification exams as the limited license (Building or Residential, through PSI).21 NCAC 12A .0304(a)(3): "Application for unlimited license: $125.00". Annual renewal fee not to exceed $125.00 (G.S. 87-10(e)). PSI examination fee $79 per exam.G.S. 87-10(a1): "The holder of an unlimited license shall be entitled to act as general contractor without restriction as to value of any single project". NCLBGC FAQ: "The unlimited license has no dollar limit on the size of the projects that can be undertaken."

Who does NOT need this license — exemptions

G.S. 87-1(a): work where the cost of the undertaking is under $40,000 does not fall within the definition of general contracting (manufactured modular buildings excepted). G.S. 87-1(b) exempts: “(1) Persons, firms, or corporations furnishing or erecting industrial equipment, power plan equipment, radial brick chimneys, and monuments.” (2) Anyone who constructs or alters a building on land they own, provided “the building is intended solely for occupancy by that person and his family, firm, or corporation after completion” and G.S. 87-14 is complied with; if the building is not so occupied for at least 12 months after completion, the statute presumes it was not intended solely for that occupancy. “(3) Any person engaged in the business of farming who constructs or alters a building on land owned by that person and used in the business of farming, when the building is intended for use by that person after completion.” G.S. 87-1.2: contracts for the Department of Transportation project types specified in G.S. 136-28.14 are not subject to the licensing requirement. G.S. 87-1.1: electrical (Article 2) and plumbing, heating and fire sprinkler (Article 4) licensees bidding directly with an owner are excepted when a licensed general contractor performs all general-contracting work and the percentage limits set by rule are met. G.S. 87-12: “A license issued by any other occupational licensing board having jurisdiction over any work described in G.S. 87-10 shall qualify such licensee to perform the work for which the license qualifies him without obtaining the license from the General Contractors Licensing Board.” Specialty classifications exclude work licensed by another board (G.S. 87-10(b)(4)).

Fees

Application fees, 21 NCAC 12A .0304(a) as printed in the Board’s 2026 Laws and Regulations book (revised January 2026): “(1) Application for limited license: $75.00; (2) Application for intermediate license: $100.00; (3) Application for unlimited license: $125.00”; increase in limitation “$100.00 for increase to intermediate license and $125.00 for increase to unlimited license”; late renewal “$10.00 per month for every month or part after the first day of January”. .0304(c): “All fees charged by the Board shall be non-refundable.” Renewal fee ceilings, G.S. 87-10(e): “a fee not to exceed one hundred twenty-five dollars ($125.00) for an unlimited license, one hundred dollars ($100.00) for an intermediate license, and seventy-five dollars ($75.00) for a limited license.” Examination: G.S. 87-10(a1) caps the exam fee at $100.00; the PSI bulletin (updated 11/19/2025) lists an examination fee of $79 per exam, paid to PSI. Criminal background check costs are separate under G.S. 87-10(a1). The application is filed online and the portal’s fee screen sits behind an account login, so the amounts above are the Board’s rule and statute figures.

Exam

Computer-based exams are administered by PSI. NCLBGC License applicants page (as of October 29, 2026): “Computerized-based examinations for the Licensing Board for General Contractors are administered by PSI Examination Services.” The Board first reviews the new license application; NCLBGC FAQ: “Once everything is in order on the application, an eligibility letter will be emailed to you with the necessary information to schedule the examination with PSI.” PSI candidate information bulletin (updated 11/19/2025): examination fee “$ 79”; Building exam 90 questions, 70% required to pass, 200 minutes; Residential exam 90 questions, 70% required to pass, 210 minutes; Business and Law exam 40 questions, 70% required to pass, 90 minutes (required of a qualifier who uses an examination waiver from another state). “The eligibility letter is valid for 120 days from the date on the letter and allows the candidate to take one examination within that time frame.” PSI: “Candidates may retake an examination as many times as they choose in a 12-month period so long as all information included in the license application remains valid.” The NASCLA National Accredited Building Examination is accepted for the Building classification.

Renewal & continuing education

Annual. G.S. 87-10(e): “A license shall expire on the first day of January following its issuance or renewal and shall become invalid 60 days from that date unless renewed, subject to the approval of the Board.” The Board’s 2026 Laws and Regulations book: “Licenses must be renewed annually by December 31 for the following year, or the license expires. If a license is not renewed within sixty (60) days following expiration, it becomes ‘invalid,’ and the contractor becomes, in effect, unlicensed. Reexamination is required if a license is not renewed for four (4) years following expiration.” Renewals received on or after January 1 carry a late payment of $10.00 per month (G.S. 87-10(e)). Renewal requires evidence of continued financial responsibility and of completed continuing education. NCLBGC FAQ (as of October 29, 2026): renewals are filed online at www.ncclic.org and “Paper applications are no longer accepted.” 8 hours per year for licenses with a Building, Residential or Unclassified classification. G.S. 87-10.2(a): “at least one qualifier or qualifying party of a licensee holding a building contractor, residential contractor, or unclassified contractor license classification shall complete, on an annual basis, eight hours of continuing education”. G.S. 87-10.2(b): “two hours shall be a mandatory course approved by the Board and the remaining six hours shall be elective courses approved by the Board”; up to four elective hours may be carried forward to the next calendar year. G.S. 87-10.2(d): credit is given only for courses “taught live by an instructor approved by the Board”, and defines live instruction to include Internet transmission of a live or previously recorded approved presentation that is proctored or has Board-approved safeguards; the Board’s FAQ (as of October 29, 2026) lists in-person, synchronous distance learning and e-Learning formats. G.S. 87-10.2(g): continuing education runs January 1 to November 30 of each calendar year, with a 90-day grace period after November 30. A licensee may instead request inactive status under G.S. 87-10.2(h) and pay the same annual renewal fee.

How to apply

Applications are handled by North Carolina Licensing Board for General Contractors (NCLBGC). Start at the official application page .

Verify a license in North Carolina

North Carolina Licensing Board for General Contractors publishes a public license search , searchable by Classification Type, License Number, Qualifier Number, Company Name, First Name, Last Name, Phone Number, Street Address, Zip, City or State. It covers NCLBGC general contractor licenses and qualifiers, including the Accredited Builder and Accredited Master Builder designations listed as classification types.

Results come from the operator’s own system, through the search above. LicensingAtlas does not hold license records and cannot confirm any individual’s status — the date on this page refers to the requirements described above, not to anyone’s credential.