Construction Industries Division (CID), New Mexico Regulation and Licensing Department; license and qualifying-party paperwork processed by PSI for CID administers GB-98 General Building and GB-2 Residential Contractor licensing in New Mexico. Every figure below is verified against the board’s own official pages and dated. Who must personally hold a credential — the contractor, the business, or the individual worker — is set out under Requirements.

What it’s called

New Mexico general contractor license; NM GB-98 license; NM GB98 general building license; NM GB-2 residential contractor license; NM GB02 license; New Mexico CID contractor license; New Mexico qualifying party certificate. CID issues the contractor license to the business entity and a qualifying party certificate to the individual who qualifies it. Electrical (EE) and mechanical/plumbing (MM) classifications are separate CID classifications and are not covered on this page.

License types & fees

TypeExperienceExamFeeScope Limit
Contractor license, GB-98 General Building classification (issued to the business entity, qualified by a GB-98 Qualifying Party)14.6.6.9(B)(2) NMAC: "four years of foreman level practical or related trade experience of which at two years must be commercial experience" (rule text as published). The CID application page: the experience must be within the 10 years immediately preceding application.Qualifying Party passes the GB-98 two-part exam at PSI (Part 1 is the GB-2 Residential exam, 80 questions, 225 minutes, 75%; Part 2 is 100 questions, 310 minutes, 75%, open book) plus the Business and Law exam or an approved Business and Law course (PSI bulletin updated 4/3/2026).PSI exam fees: GB-98 two-part exam $269.06; Business and Law $68.88. License: $30 application fee, $6 certificate fee and $300 per classification for GB98 (PSI New Mexico Licensing Fees sheet); 14.5.5.8 NMAC states a $30 application fee and $100 per year or $200 for two years per GB-98 classification. See the fees section.14.6.6.9(B)(2) NMAC: "Erect, alter, repair or demolish residential and commercial buildings, and certain structures; includes all work authorized by the GB-2, GF-5, GF-7 and GS classifications; seal coating and striping of driveways and parking lots; excludes those structures covered by the EE, MM, GA or GF classifications." 14.6.6.8(B)(2) NMAC: a GB-98 contractor may bid as prime contractor on a mechanical, plumbing or electrical project that includes GB-98 work, with work outside its classification subcontracted to licensed entities; under 14.6.6.8(B)(3) it may not bid an entire project whose major portion by dollar amount falls under any GA classification or GF-1, GF-2, GF-3, GF-4, GF-6, GF-8 or GF-9.
Contractor license, GB-2 Residential classification (issued to the business entity, qualified by a GB-2 Qualifying Party)14.6.6.9(B)(1) NMAC: "Requires two years' of foreman level practical or related trade experience." 14.6.3.8(G)(2)(a) NMAC states that no qualifying-party applicant may test until providing "satisfactory work experience, as to four years within the 10 years immediately prior to application"; both rule texts are stated.GB-2 Residential Building Contractor exam (80 questions, 75% or 60 points, 225 minutes) plus the Business and Law exam or approved course (PSI bulletin updated 4/3/2026).PSI exam fees: GB-2 $134.53; Business and Law $68.88. License: $30 application fee, $6 certificate fee and $300 per classification for GB02 (PSI New Mexico Licensing Fees sheet); 14.5.5.8 NMAC states $100 per year or $200 for two years per GB-2 classification.14.6.6.9(B)(1) NMAC: "Erect, alter, repair or demolish residences and apartment houses accommodating not more than four family units, Groups R-1, R-2 and R-3, as those groups are defined in 14.7.2 NMAC; items included in Group U, as defined in 14.7.2 NMAC, when incidental to these structures; includes all work described by the GS specialty classifications, provided the work is limited to residential construction as defined under this provision."

Who does NOT need this license — exemptions

NMSA 1978 60-13-3(D) excludes from the definition of contractor, among others: a person who merely furnishes materials or supplies at the site; an individual who, alone or with wage-paid helpers, builds or makes installations, alterations or repairs in or to a single-family dwelling owned and occupied or to be occupied by him, in conformity with the Act and codes; a person who acts on his own account to build or improve a single-family residence for his personal use, including a free-standing storage building on that property, provided the work conforms to the Act and codes and “he does not engage in commercial construction”; work on a farm or ranch owned, occupied or operated by the person (with an electrical-connection condition); an individual who works only for wages; a handyman working on one project at a time not exceeding $7,200 compensation a year, casual, minor or inconsequential, not involving electrical wiring, plumbing or gas fitting, not part of a larger operation, without advertising, and with an annual declaration filed with the division (also 14.6.2.8 NMAC); weatherization projects not exceeding $2,000 approved by a federal or state agency; and short-term depreciable repairs to commercial property for items not covered by building codes where the total paid on a single undertaking does not exceed $5,000. The full list is in NMSA 1978 60-13-3(D).

Fees

Three official fee statements differ and all are stated. PSI New Mexico Licensing Fees sheet (PSI processes CID licensing; as of October 29, 2026): contractor license $30 application fee (non-refundable) and $6 certificate fee, plus $300 per classification for GB02, GB98, GA98, GF98, EE98 and MM98 (new and renewal) and $150 per classification for all other single classifications; the maximum fee for multiple classifications within a category is $300 (example given: GB98 plus any GS classification = $300). The CID application page lists a “$36 application fee and applicable license fees” and a $36 QP application fee. 14.5.5.8 NMAC: a $30 non-refundable application fee, and a basic fee for an initial or renewed GA-98, GB-2, GB-98, GF-98, EE-98 or MM-98 license of “$100.00 per year, or $200.00 for two years, for each such classification”; 14.5.5.8(G) authorizes the division to increase examination fees by a multiplier of up to three. Qualifying Party certificate: $30 application fee per submittal and $6 certificate fee per classification (PSI fee sheet). PSI exam fees (bulletin updated 4/3/2026): Business and Law $68.88; GB-2 $134.53; GB-98 two-part exam (includes the GB-2 exam) $269.06; retake of GB-98 Part 2 $134.53. Late renewal (PSI fee sheet and renewal instructions): 1-30 days $1 per day; 30-90 days equivalent to 1 year’s fee; 90+ days cancelled. Military service members and veterans licensed under the expedited rule pay no license fee for the first three years (14.6.3.8 NMAC; PSI application).

Exam

CID application page (as of October 29, 2026): “Exams for all Construction Industries license types are administered by PSI.” Candidates must be preapproved before scheduling. PSI candidate information bulletin (updated 4/3/2026): Business and Law, 50 questions, 75% (38 points), 130 minutes, required of all new contractor candidates unless an approved Business and Law course is taken; GB-2 Residential Building Contractor (also GB-98 Part 1), 80 questions, 75% (60 points), 225 minutes; GB-98 General Building Contractor Part 2, 100 questions, 75% (75 points), 310 minutes, open book. PSI: the Business and Law exam and the trade exam must both be passed within 1 year. 14.6.3.8(G)(2)(c)-(d) NMAC: “A passing exam score is seventy-five percent or higher”; a failed applicant may retest after reapplying and paying the fee, but may not repeat the exam more than twice in any 30-day period.

Renewal & continuing education

PSI renewal instructions for CID (as of October 29, 2026): “Your New Mexico contractor license will expire every three years, effective on the last day of the month in which it was issued. Licenses not renewed by the expiration date are suspended. Licenses not renewed within 90 days of the expiration date are cancelled.” The PSI application: “The license will be effective for three years from the date of issuance.” NMSA 1978 60-13-18(B): contractor’s licenses “shall expire two years after the issuance date or as determined by the division, but in no instance less than one year”. Renewal requires the renewal form signed by every qualifying party and notarized, the renewal fee, and a new bond or continuation certificate covering the 3-year term (PSI renewal instructions). CID Continuing Education page (as of October 29, 2026), General Building: “The General Building Bureau does not have continuing education requirements for contractors.” NMSA 1978 60-13-18(D) allows the division to require, by rule, eight hours of code-change instruction and eight hours of other approved instruction within the three years before renewal; the CID page applies its 16-hour requirements to journeyman electrical, plumbing and mechanical certificates.

How to apply

Applications are handled by Construction Industries Division (CID), New Mexico Regulation and Licensing Department; license and qualifying-party paperwork processed by PSI for CID. Start at the official application page .

Verify a license in New Mexico

PSI for the New Mexico Regulation and Licensing Department, Construction Industries Division publishes a public license search . It covers Contractor license search linked from the CID application page (verify a contractor license).

Results come from the operator’s own system, through the search above. LicensingAtlas does not hold license records and cannot confirm any individual’s status — the date on this page refers to the requirements described above, not to anyone’s credential.