Utah Division of Professional Licensing (DOPL), Utah Department of Commerce administers general contractor licensing in Utah. Every figure below is verified against the board’s own official pages and dated. Who must personally hold a credential — the contractor, the business, or the individual worker — is set out under Requirements.
What it’s called
Utah contractor license; Utah general contractor license; B100 General Building Contractor; R100 Residential and Small Commercial Contractor; E100 General Engineering Contractor; DOPL contractor license; Utah Construction Trades Licensing Act license
License types & fees
| Type | Experience | Exam | Fee | Scope Limit |
|---|---|---|---|---|
| B100 General Building Contractor | Two years (4,000 hours) of paid work experience in the construction industry, self-certified; alternatives are qualifying on a Utah contractor license for at least 2 years, a two-year associate or four-year bachelor's degree in Construction Management from a program or institution recognized by the U.S. Department of Education, a Utah Professional Engineer license, or passing the NASCLA Accredited Examination for Commercial General Building Contractors (DOPL General Contractor page; R156-55a-302b). | Utah Business and Law exam (Prov), or one year of licensed experience in another U.S. state, district or territory in a similar scope with a license active and in good standing, or qualifier on a Utah contractor license before May 9, 2017 (DOPL General Contractor page). | $175 per classification plus $50 per qualifier and a $1 electronic reference library surcharge (Contractor Application All Classifications, v.20260930). | Utah Code 58-55-102: qualified to perform or superintend construction of structures for the support, shelter, and enclosure of persons, animals, chattels, or movable property, or any components of that construction, except plumbing, electrical work, mechanical work, work related to the operating integrity of an elevator, and manufactured housing installation, for which the contractor employs a contractor licensed in the specialty; a B100 contractor building single-family and multifamily residences up to four units may perform the mechanical work and hire a licensed plumber or electrician as an employee. Scope detail in Utah Admin. Code R156-55a-301c. |
| R100 Residential and Small Commercial Contractor | Same as B100. | Same as B100. | $175 per classification plus $50 per qualifier and $1 surcharge (Contractor Application, v.20260930). | Utah Code 58-55-102(42): construction of single-family residences, multifamily residences up to four units, and commercial construction of not more than three stories above ground and not more than 20,000 square feet, or any components, except plumbing, electrical work, mechanical work and manufactured housing installation (residential work up to four units may include the mechanical work). Scope detail in R156-55a-301h. |
| E100 General Engineering Contractor | Same as B100. | Same as B100. | $175 per classification plus $50 per qualifier and $1 surcharge. | Utah Code 58-55-102: fixed works requiring specialized engineering knowledge, such as airports, bridges, highways, pipelines, power plants, railroads, sewers, tunnels and water supply; may not perform or superintend construction of structures built primarily for the support, shelter and enclosure of persons, animals and chattels, or plumbing work. |
| Specialty contractor classifications | Utah Code 58-55-302(1)(e)(ii)(A): no employment experience is required for licensure as a specialty contractor. | Utah Code 58-55-302(1)(c)(i): no division-administered examination for a specialty contractor; a 25-hour pre-licensure course is required. | $175 per classification plus $50 per qualifier and $1 surcharge. | Specialty classifications and scopes are listed in R156-55a; DOPL's Specialty Contractor page sends applicants to the Utah Office of Administrative Rules for the list. |
Who does NOT need this license — exemptions
Utah Code 58-55-305(1), in addition to the exemptions in 58-1-307, lets these persons work without a contractor license, subject to the stated limits: (a) authorized representatives of the United States and employees of the state or its political subdivisions on the government’s own construction work; (b) construction incidental to irrigation and drainage districts, farming, dairying, agriculture, livestock or poultry raising, mining, quarries, sand and gravel, well drilling, hauling to and from sites, and lumbering; (c) public utilities on work incidental to their own business; (d) a sole owner of property building no more than one residential structure per year and no more than three per five years on that property for noncommercial, nonpublic use, and incidental structures such as a shed, carport or detached garage; (e) unpaid helpers (token compensation only) working under the direction of that owner; (f) sellers of personal property installed by a licensed contractor; (g) a bidder on a federal aid highway project who is licensed before starting construction; (h) alteration, repair, remodeling, addition or improvement of a building with a contracted value of less than $7,000 including labor and materials, except that plumbing, electrical, gas appliance, fire protection, alarm, HVAC and radon mitigation work must still be done by the appropriate licensee, and if the project exceeds $3,000 the person files a one-time affirmation of liability insurance (and workers’ compensation if applicable) with DOPL; (i) specialty trades the director does not classify by rule as significantly impacting public health, safety and welfare; (j) owners and lessees of property and their regularly employed maintenance staff working on that property; (k) minor plumbing incidental to repairing a fixture or appliance, without modifying piping or gas appliances; (l) water conditioner installers under a licensed specialty contractor’s direction; (m)-(o) certain utility, railroad, telephone and elevator-company electrical work, minor electrical work incidental to a mechanical or service installation, and grandfathered solar specialty licensees; (p) students in approved construction training programs where the work is inspected and a licensed contractor obtains permits; (q) delivery persons replacing a gas range, dryer, outdoor barbeque or patio heater at an existing shutoff valve; (r) non-safety elevator maintenance; (s) apprentices or helpers of a licensed elevator mechanic.
Fees
Contractor Application All Classifications (v.20260930), non-refundable application processing fee made payable to DOPL: $50.00 per qualifier, plus $175.00 per classification, plus the Electronic Reference Library Surcharge of $1.00 The March 2026 version of the same form (v20260327) also listed a ‘$20 registration fee’ for each owner of an unincorporated applicant owning less than 8%; that line was not found in the September 30 version. Prov exam fee: $85.00. Renewal fee: DOPL’s Renew a License page directs licensees to the DOPL Fee Schedule for the current renewal fee; fees are non-refundable. The DOPL Fee Schedule page states that online transactions under $100 carry a small flat processing fee and transactions of $100 or more a processing fee of up to 3%.
Exam
B100, R100, E100, H100 and the general plumbing and electrical contractor classifications require the Utah contractor Business and Law Exam (DOPL Exam Information page), administered by Prov, Inc.; no pre-approval is needed to sit for it, and fees are paid to the exam provider. Prov’s Contracting Business and Law Candidate Information Bulletin (effective October 29, 2026): UT Contractors Business and Law, 120 minutes, 60 questions, 70% to pass, open book, exam fee $85.00, offered in English and Spanish; open-book references include the Utah NASCLA Contractors Guide to Business, Law and Project Management, the Utah Contractor Education Book (HBA) and The Utah Contractor Business & Law Manual (AGC). Retakes per the bulletin: no limit on attempts; wait 30 days after a failure, and 180 days before each attempt after a third failure; R156-55a-302a(2)(b) says “no sooner than six months following any failure thereafter”. DOPL’s exam page describes the HVAC exams as allowing 3 attempts, 30 days apart, with each subsequent retake 180 days apart. Utah Code 58-55-302(1)(c)(ii) describes the exam as covering the 25-hour pre-licensure course and, for courses completed on or after July 1, 2019, the five-hour business law course. Alternatives to the exam are listed under license types.
Renewal & continuing education
Two-year renewal cycle (58-55-302.5; R156-55a-303a). ‘Contracting licenses expire on November 30th of odd years’ (DOPL Renew a License page); DOPL emails renewal notices at least 60 days before expiration. Renewal is online through My License One with a UtahID and cannot be completed on a mobile device. Renewal requires an active liability insurance certificate with DOPL as certificate holder, workers’ compensation proof or a coverage waiver, a renewed business entity registration, and answers to the mandatory disclosure questions. Six hours of approved continuing education during each two-year renewal cycle (Utah Code 58-55-302.5(1)(a); R156-55a-303b). R156-55a-303b: at least three hours are core education and the remaining three may be professional or core; at least three hours are live in-class attendance and the remaining three may be distance learning. Under 303b(1)(d), contractors whose renewal cycle ends after January 1, 2020 ‘shall complete at least one of their six continuing education hours in energy conservation’, while Utah Code 58-55-302.5(1)(b) says a licensee ‘may complete one hour of approved continuing education on energy conservation’. DOPL’s Renew a License page: ‘Utah contractors need 6 CE hours, 3 of which must be taught live (live webinar counts). Each course applies to all of your contracting licenses.’ Courses are offered by the providers listed in 58-55-302.5(2), including the Associated General Contractors of Utah, Associated Builders and Contractors Utah Chapter and the Utah Home Builders Association. The Legislature’s code site marks Section 58-55-302.5 as repealed on January 1, 2027 under the 2026 renumbering of Chapter 55. DOPL’s continuing education page: ‘Maximum of 3 hours may be completed online.’
How to apply
Applications are handled by Utah Division of Professional Licensing (DOPL), Utah Department of Commerce. Start at the official application page .
Verify a license in Utah
Utah Division of Professional Licensing (DOPL) publishes a public license search . It covers Utah professional and contractor licenses, linked as Verify a License from DOPL’s contracting pages.
Results come from the operator’s own system, through the search above. LicensingAtlas does not hold license records and cannot confirm any individual’s status — the date on this page refers to the requirements described above, not to anyone’s credential.