Washington State Department of Labor & Industries (L&I), Contractor Registration administers the Construction Contractor Registration in Washington. Every figure below is verified against the board’s own official pages and dated. Who must personally hold a credential — the contractor, the business, or the individual worker — is set out under Requirements.
What it’s called
Washington contractor registration. Searched as ‘Washington general contractor license’, ‘WA contractor license’ or ‘L&I contractor license’: the state credential is a registration, not a license. The credential L&I issues is a certificate of registration (RCW 18.27.060), in two classifications, General contractor and Specialty contractor; the application is titled “Application For Construction Contractor Registration”. Registration rests on a bond and insurance, with no exam. Electrical, plumbing and other trades that L&I lists with separate examination and licensing requirements are covered on separate pages.
Registration types & fees
| Type | Experience | Exam | Fee | Scope Limit |
|---|---|---|---|---|
| General contractor registration (certificate of registration, RCW 18.27) | No experience requirement appears in the L&I registration page, Application F625-001-000 (07-2026) or RCW chapter 18.27, as read on October 29, 2026. Registration rests on a Department of Revenue business filing, a $30,000 surety bond or assigned savings account (RCW 18.27.040), general liability insurance (RCW 18.27.050) and a notarized affidavit from each principal. | No examination for contractor registration: the L&I registration page and Application F625-001-000 list none, and RCW chapter 18.27, read in full on October 29, 2026, contains no examination provision. | Application fee $150.20 (Application F625-001-000, 07-2026; WAC 296-200A-900). Bond: $30,000. | RCW 18.27.010(5): "General contractor" means a contractor whose business operations require the use of more than one building trade or craft upon a single job or project or under a single building permit; it also includes one who superintends, or consults on, work falling within the definition of a contractor. L&I's registration page (as of October 29, 2026): "General contractors can perform most types of construction work. They can hire subcontractors in multiple specialties." L&I adds that work in plumbing, electrical, elevators, mobile home installation, boilers and asbestos has "additional requirements for education, examination, and licensing." Application F625-001-000 (07-2026): "General contractor - Requires a $30,000.00 bond and may perform more than one construction trade". |
| Specialty contractor registration (certificate of registration, RCW 18.27) | Same as general contractor registration: no experience requirement in the sources read; bond of $15,000 instead of $30,000. | No examination for contractor registration (L&I registration page; Application F625-001-000; RCW chapter 18.27). | Application fee $150.20 (Application F625-001-000, 07-2026; WAC 296-200A-900). Bond: $15,000. | RCW 18.27.010(12): "Specialty contractor" means a contractor whose operations do not fall within the definition of general contractor, and "A specialty contractor may only subcontract work that is incidental to the specialty contractor's work." L&I's registration page (as of October 29, 2026) states it differently: "Specialty contractors can only perform work in the specialty they are registered in. They cannot hire subcontractors." Both are stated here. L&I regulates 63 specialties (for example roofing, painting, HVAC and tree removal); Application F625-001-000 points to WAC 296-200A-016 for the scope of each trade. |
Who does NOT need this registration — exemptions
RCW 18.27.090 lists 17 exemptions from registration (full text read October 29, 2026): (1) authorized representatives of the United States, the state, or any city, town, county, township, irrigation or reclamation district or other municipal or political subdivision; (2) officers of a court acting within the scope of their office; (3) public utilities regulated by the utilities and transportation commission, for work incidental to their own business; (4) petroleum, gas and mining work performed by an owner or lessee; (5) sale of finished products that do not become part of a structure; (6) work on personal property by the registered or legal owner, or by a licensed mobile/manufactured home dealer or manufacturer providing warranty service; (7) work within a site or reservation under federal jurisdiction; (8) a person who only furnishes materials, supplies or equipment; (9) a project whose aggregate contract price for labor, materials and all other items is less than five hundred dollars, except where the work is part of a larger operation, where contracts are split to evade the chapter, or where the person advertises or otherwise indicates to the public that he or she is a contractor; (10) irrigation and drainage ditch work of irrigation or reclamation districts, farming, dairying, agriculture, viticulture, horticulture, stock or poultry raising, and fire-prevention clearing in rural districts, except when performed by a registered contractor; (11) an owner who contracts for a project with a registered contractor, except a person acting as a contractor to lease or sell improved property he or she has owned for less than twelve months; (12) any person working on his or her own property, or on his or her personal residence, except a person who performs the activities of a contractor on his or her own property for the purpose of selling, demolishing or leasing it; (13) an owner performing maintenance, repair and alteration work on his or her own properties, or using his or her own employees to do it; (14) a licensed architect or civil or professional engineer acting solely in a professional capacity, and a Washington-certified electrician or plumber (or a plumber licensed by a political subdivision, within it) operating within the scope of that certification; (15) a person working as an employee with wages as his or her sole compensation; (16) highway contractors prequalified with the department of transportation under RCW 47.28.070; (17) a mobile/manufactured home dealer or manufacturer who subcontracts installation, set-up or repair of homes it made or sold to actively registered contractors.
Fees
Application F625-001-000 (revised 07-2026) and the L&I registration page (as of October 29, 2026): application fee $150.20. WAC 296-200A-900 (effective 7/1/26): “$150.20 for each issuance, renewal or reregistration of a certificate of registration for contractors”; $70.90 for reinstatement; $16.50 for a duplicate certificate of registration. RCW 18.27.075 set the fee at one hundred dollars for the 2001-2003 biennium and directs the department to revise it at least once every two years; the current amount is the one in WAC 296-200A-900. Bond and insurance premiums are charged by the surety and insurer; L&I: “Premiums vary with each company”.
Exam
Washington registers construction contractors without an examination. The L&I registration page and Application F625-001-000 (07-2026) list no exam, and RCW chapter 18.27, read in full on October 29, 2026, contains no examination provision. L&I states that contractors working with plumbing, electrical, elevators, mobile home installation, boilers and asbestos have separate education, examination and licensing requirements.
Renewal & continuing education
RCW 18.27.060(1): “A certificate of registration shall be valid for two years and shall be renewed on or before the expiration date.” WAC 296-200A-900: the registration is valid for two years from the date of issuance, renewal or reregistration, or until suspended or revoked. Renewal costs $150.20 online (with the 12-digit contractor registration number and UBI number), by mail with the renewal card, or in person; bond and insurance on file must be current. Reinstatement after a suspension costs $70.90 and requires proof that the cause (for example a cancelled bond or insurance, or an unsatisfied judgment) was corrected (L&I registration page, as of October 29, 2026). None for contractor registration in the sources read: RCW chapter 18.27 (read in full on October 29, 2026), the L&I registration and renewal instructions and Application F625-001-000 contain no continuing-education requirement; renewal requires the fee and a current bond and insurance.
How to apply
Applications are handled by Washington State Department of Labor & Industries (L&I), Contractor Registration. Start at the official application page .
Verify a registration in Washington
Washington State Department of Labor & Industries (L&I) publishes a public registration search , searchable by Name, Contractor/tradesperson license, Workers’ comp account or WA UBI No.. It covers Contractors, tradespeople and businesses registered or licensed with L&I; L&I states a newly registered business is listed in this tool.
Results come from the operator’s own system, through the search above. LicensingAtlas does not hold license records and cannot confirm any individual’s status — the date on this page refers to the requirements described above, not to anyone’s credential.